Light the gas for a fast supper or build a fire for a long one, in one built-in braai.
From: Original price was: R29,660.00.R27,899.00Current price is: R27,899.00.
Save R1,761In stock Delivery ETA: 5–7 working days
See it in your space. Send a photo and measurements for a quote and a visual preview.
WhatsApp UsTWO WAYS TO BRAAI
On a busy evening, press the piezo ignition and cook on three gas burners under stainless round-bar grids. When the weekend comes, light wood or charcoal in the table braai and settle in for a proper fire. Hang a potjie on the hook, empty the ash drawer when it's cold, and close the doors on a tidy braai.
MIELIES OVER THE COALS
Midday sun on the stone wall, aloes in flower and a basket of fresh mielies on the counter. Today the coals do the cooking: three mielies turn slowly on the grid and the first ones are already in a bowl on the table. The gas griller stays ready for the chops later on.
The stone wall, counters, plants, basket, table, chairs, food and tableware are not included. Plan the flue, gas connection and clearances with an independent installer.
A LITTLE PRACTICAL THINKING
THE GAS
Three cast-iron burners sit under stainless round-bar grids, and the piezo ignition lights them without matches. Stainless vaporiser plates and a drip tray sit below, and the dust cover lid keeps the griller clean between braais.
THE FIRE
The table braai takes wood or charcoal under a 550 × 460 mm grid that you can set at the height the fire needs. Hang a potjie on the hook for something slow, and pull out the removable ash drawer once the ash is cold.
THE BUILD
The body is 3 mm mild steel with a black finish. Top and bottom doors close the front when you're done, and the light fitting keeps the braai going after dark.
MEASURE THE WHOLE SETUP
Confirm the depth before you build.
Ask us to confirm the body depth before you plan the recess. The 855 mm body height does not include the 325 mm gather or the flue, and these are product dimensions, not a building opening.
GOOD TO KNOW
Read your instruction manual before you plan the installation.
The 1200 Combo braai: a black 3 mm mild-steel body with top and bottom doors, a Homefires 9903 stainless-steel flat-top gas griller with three burners, and a model 580 table braai for wood or charcoal with a grid and a removable ash drawer. A potjie hook, a light fitting, insulation material and touch-up paint come with it. The flue pipe, collar and cowl are optional add-ons.
Gas on the gas griller, and wood or charcoal in the table braai. The two sections cook separately.
It is listed for LPG at 2.8 kPa. There's also a natural-gas setting of 2.0 kPa, but only Homefires can convert the griller, so tell us which gas you have before you order. The 9903 griller has a listed heat output of 10.5 kW. That figure is for cooking, not for heating a room.
The charcoal grid is 550 × 460 mm, and you can adjust its height over the coals. The gas griller has two stainless round-bar grid panels, one of 347 × 397 mm and one of 200 × 397 mm. The potjie hook takes a potjie for slow cooking.
No. The flue pipe, collar and cowl are optional add-ons that you can choose on this page. Send a photo and measurements for a flue and configuration quote, and we will confirm the right parts for your setup.
At the outlet on top of the gather. The gather rises 325 mm above the body, and the outlet is 500 × 350 mm. The Homefires flue parts on this page have a nominal size of 500 × 350 mm. Homefires' installation guidance gives a minimum chimney height of 2,500 mm.
The body is 1,240 mm wide and 855 mm high, and the gather rises 325 mm above it. The front frame is 1,290 mm wide and 880 mm high, and the open lower door reaches 455 mm in front of the body. Ask us to confirm the body depth before you build. Homefires' guidance leaves a 20 mm expansion gap at the sides and the back. These are product dimensions, not a building opening.
Keep 250 mm at the sides of the griller and 1,500 mm above the cooking surface. Your installer applies these together with the braai's own installation instructions.
The version on this page has the standard body: mild steel with a black finish. Homefires also makes the body in 3CR12 or 304 stainless steel as a special order, so ask us for a quote if you would like one.
Touch-up paint comes with the braai, so you can refresh small marks on the black finish. Empty the ash drawer once the ash is cold, put the dust cover lid on the griller after use, and read the instruction manual for use and care.
The firebox has a 15-year Homefires guarantee against faulty workmanship or material under normal use. Replaceable parts are not covered, and maintenance, corrosion and installation exclusions apply. The gas griller has its own 12-month Homefires warranty from the date of purchase, subject to its conditions. Ask us for the full terms.
Yes. Send a photo and measurements for a product, gas and flue configuration quote. We do not install. It needs a registered gas installer and a completion certificate, so arrange the installation and the gas connection with an independent, registered installer.
We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available
Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.
Added to your cart
