THE GAS
LPG, matched to the burner.
This bundle has the LPG coal gas grate. The gas you connect must match the burner and its data plate. Home Fires also makes a natural-gas version, so ask us before you order if your home runs on natural gas.

A built-in gas fire on a coal-finish grate, with no flue connection.
Original price was: R19,690.00.R18,299.00Current price is: R18,299.00.
Save R1,391In stock Delivery ETA: 5–7 working days
See it in your space. Send a photo and measurements for a quote and a visual preview.
WhatsApp UsMORE ABOUT THE 940
The 940 is a single-sided, vent-free gas firebox that builds into a wall. Its mild-steel housing and façade come in black, and the coal-finish gas grate, model 700, sits in the open firebox. This bundle has the LPG burner. Home Fires also makes a natural-gas version, so ask us if that suits your home better.
Ask us to confirm the minimum room size and ventilation for your room before you order.
GAME TIME BY THE FIRE
A board game on the table, mugs of something warm and the fire glowing in the stone wall. There are no logs to fetch and no flue in the way, so the afternoon stays all about the game. Whoever loses makes the next round of tea.
The stone feature wall, furniture and décor are not included. Plan the gas connection, room size and ventilation with an independent, qualified gas installer.
A LITTLE PRACTICAL THINKING
THE GAS
This bundle has the LPG coal gas grate. The gas you connect must match the burner and its data plate. Home Fires also makes a natural-gas version, so ask us before you order if your home runs on natural gas.
THE ROOM
The firebox is vent free, with no flue connection. Ask us to confirm the minimum room size and ventilation for your room before you order, and have a qualified gas installer check them on site.
THE GRATE
The model 700 coal gas grate is 650 mm wide, 270 mm deep and 200 mm high, and uses at most 0.64 kg of gas an hour.
MEASURE THE WHOLE SETUP
The façade overlaps the body.
The 940 mm façade overlaps the 760 mm body by 90 mm on each side, 75 mm at the top and 30 mm at the bottom. These are product sizes, not a masonry recess, so have your installer check the actual unit before building.
GOOD TO KNOW
Plan the gas connection, the room and the wall with a qualified gas installer before you order.
The HomeFires 940 vent-free gas firebox, with its black mild-steel housing and façade, and the coal-finish gas grate, model 700, for LPG. The gas supply, the gas connection, building work and installation are not included.
This bundle has the LPG burner (supplier code GASGRA700VFC). Home Fires also makes a natural-gas version. The gas you connect must match the burner and its data plate, so ask us before you order if your home runs on natural gas.
No. The 940 is an open, vent-free firebox with no flue connection. Ask us to confirm the minimum room size and ventilation for your room before you order.
At most 0.64 kg of gas an hour with this coal gas grate.
We do not have a confirmed kW rating or room size for this firebox, so the Output Calculator has no figure for it. Send us your room sizes and we will check them with Home Fires before you order.
The façade is 940 mm wide and 835 mm high. The body behind it is 760 mm wide and 410 mm deep, 730 mm high at the front and 475 mm high at the back, where the top slopes down. These are product sizes, not a masonry recess. Have your installer check the actual unit and the opening before building.
The model 700 coal gas grate is 650 mm wide, 270 mm deep and 200 mm high.
It is made for a single-sided, built-in installation into a wall.
Ask us for Home Fires' current guarantee terms for this firebox and grate before you order.
Yes. Send a photo and measurements of your wall for a product quote. We do not install, so arrange the installation and the gas connection with an independent, qualified gas installer.
We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available
Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.
PLEASE NOTE: Ony available in Gauteng* We offer a free site visit and quote for installations in Johannesburg. For Pretoria, site visits are R350. Simply give us your details below and we will contact you for further details.
Added to your cart