Braai Culture CART 0
Sale!
Dovre 2120 built-in fireplace insert in black, three-quarter view: a wide fire window in the black glass door, and round connections on top
Your fireplace, up close
Will it fit my space?

Dovre 2120 Multifuel Built In Cast Iron Fireplace

Dovre 2120 Multifuel Built In Cast Iron Fireplace in 3D

Drag or use the arrow keys to turn the fireplace. Use + and − to zoom, Home to reset the view and Esc to return to the gallery.

The model does not show?

If the 360 view does not work for you, the photos, the dimension drawing and the size table on this page show the same fireplace and its measurements.

Open the 3D view on its own page

What output does your room need?

Find the right amount of warmth

Enter the dimensions of the space you want to heat. Include any connected open-plan areas.

Nominal 7 kW, maximum 9 kW on wood. The calculator uses 8 kW, the middle.

Room dimensions (m)

For a sloped or open-truss ceiling, use the average height between the lowest and highest points.

Consider roof and wall insulation, glazing and draughts. If unsure, compare the standard and poor settings.

A room-sizing estimate, not a full heat-loss survey. Climate, large windows, draughts and open stairways can change the output needed. We can help confirm a suitable fireplace.

How is this estimated?

Room volume × insulation allowance: 35 W/m³ for very good insulation, 40 W/m³ for standard insulation or 50 W/m³ for poor insulation. Divide by 1,000 for kW. The comparison uses the listed heat output of this fireplace. Ask us to confirm its operating range for your room.

DovreFireplaces

Dovre 2120 Multifuel Built In Cast Iron Fireplace

A compact multifuel insert with a straight glass door, made to sit in your wall.

Original price was: R51,420.00.Current price is: R48,399.00.

Save R3,021

SKU DOVRE2120SC/B

In stock Delivery ETA: 5–7 working days

About your fireplace

Heat
7 kW nominal, 9 kW maximum on wood
Included
The 2120 insert in black, with an ash tray, two built-in fans and a fan speed controller
Not included
Flue pipes and cowl, convection ducting, the electrical connection, installation

Free delivery in Central Gauteng on orders from R5,500. Other areas: delivery cost on request.

How delivery works

DeliveryHow it works

Because most of our products are huge, it’s difficult for us to keep stock of all of them. For this reason, we deliver a lot of our products directly from our suppliers and manufacturers, to offer you a great price and a fresh braai and a warm fireplace.

PRIORITY DELIVERYWe will make sure you are kept in the loop at every single step of the way and we will have your order processed as a priority. Tracking number included.

FREE DELIVERYLook, it’s free but we are unable to provide an exact time or take specific delivery requests as we are at the mercy of our suppliers. We still do our best to deliver as quickly as possible and in most cases we are much quicker than the stated turn around time.

Mail us for any queries.
[email protected]

Your total R48,399.00

Delivery cost to be confirmed.

Get a Quote
14-day returns on the unit* Secure payments

See it in your space. Send a photo and measurements for a quote and a visual preview.

WhatsApp Us

SMALL INSERT, WARM ROOM

A compact fire.
Fans to carry the heat.

The 2120 is a compact 595 mm wide and still shares its warmth well. Two built-in fans move warm air into the room, a thermo switch looks after them and a separate controller sets their speed. Burn wood, coal or lignite briquettes, with logs up to 40 cm long. The ash tray keeps the clean-up simple, so the evening stays about the fire.

The fans need a 230 V electrical connection near the fireplace.

  1. Two built-in fans with speed control140 m³/h fan output
  2. Fan thermo switch and separate speed controller
  3. Two convection-air connections on topØ 125 mm each
  4. Logs up to 40 cm longWood, coal or lignite briquettes
  5. Ash trayIncluded
  6. Installation manualUnder Plan your setup
Dovre 2120 insert built into a dark green chimney breast with a fire behind the glass, and a man reading in a leather armchair beside bookshelves

YOUR CORNER OF THE EVENING

A good book and a fire to read by.

Some evenings ask for nothing more than a chair near the fire. Load a few logs, close the glass door and let the fans spread the warmth through the room. Pour something warm, find your page and stay a while.

The painted chimney breast, hearth, shelves, armchair, table and décor are not included. Plan the flue, hearth and clearances with an independent installer.

MADE FOR WINTER NIGHTS

How it heats, burns and connects.

THE HEAT

Fans that move the warmth.

Two built-in fans give 140 m³/h of warm convection air. A thermo switch controls them, and a separate controller lets you choose the speed.

THE FIRE

Wood, coal or briquettes.

The 2120 is rated for wood, coal and lignite briquettes. The firebox takes logs up to 40 cm long, and the ash tray collects the ash. Follow the manual for each fuel.

THE CONNECTIONS

Flue and air ducts on top.

The 150 mm flue connects at the top, with two 125 mm convection-air connections beside it. Plan the flue route and any ducting with an independent installer before the wall goes up.

MEASURE THE WHOLE SETUP

Will it fit your space?

Open dimension drawing
Dimension drawing of the Dovre 2120: front view with width and height, top view with the depth, the flue and two convection-air connections, in millimetres
Download the dimension drawing
Insert width × height
595 × 495 mm
Insert depth
455 mm
Flue connection diameter
150 mm
Flue centre from the rear
120 mm
Convection-air connection diameter
125 mm
Convection-air centres, left to right
440 mm
Convection-air centres from the rear
75 mm
Weight
130 kg
Fuel
Wood, coal or lignite briquettes
Finish
Black

Plan the opening, flue and ducts together.

These are the insert's own sizes, not a building opening. No standard cut-out size is given, so have an independent installer set the opening, flue, ducts and clearances from the manual.

The drawing as text
  • Dovre 2120SC/B. Closed appliance, all dimensions in mm.
  • Front: width 595 mm
  • Front: height 495 mm
  • Top: depth 455 mm
  • Top: convection-air connections Ø 125 mm, centres 440 mm apart
  • Top: convection-air connection centres 75 mm from the rear
  • Top: flue connection Ø 150 mm, centre 120 mm from the rear
  • Front and top at the same scale.

GOOD TO KNOW

Plan your setup.

Read your instruction manual before you plan the installation.

Read the instruction manual

What is included?

The Dovre 2120 insert in black, with a straight glass door, an ash tray, two built-in fans, a fan thermo switch and a separate speed controller. Flue pipes, the cowl, convection ducting, the electrical connection and installation are not included.

Which fuel can I burn?

The 2120 is rated for wood, coal and lignite briquettes. The firebox takes logs up to 40 cm long. Follow the instruction manual for each fuel.

How much heat does it give?

On wood, the 2120 is rated at 7 kW nominal output and 9 kW maximum, with 78.3% efficiency. At its lowest, it gives 2.3 kW. The Output Calculator uses 8 kW, the middle of the nominal and maximum output. Insulation, ceiling height and climate change how warm a room feels.

How do the fans work?

Two built-in fans give 140 m³/h of warm convection air. A thermo switch controls them, and a separate controller sets the speed. They need a 230 V, 50 Hz electrical connection (0.5 A), so plan a power supply near the fireplace with a qualified electrician.

What are the convection-air connections?

The 2120 has two 125 mm convection-air connections on top, 440 mm apart between centres, with their centres 75 mm from the rear. Ask your installer how to connect them for your room.

Where does the flue connect?

At the top. The flue connection is 150 mm in diameter, and its centre is 120 mm from the rear of the insert. Have an independent installer plan the flue route, height and support for your building.

Is the flue included?

No. The flue pipes and cowl depend on your room and roof. Send a photo, your room measurements and roof details for a product and flue configuration quote.

How much space do I need?

The insert is 595 mm wide, 495 mm high and 455 mm deep, and it weighs 130 kg. These are the insert's own sizes, not a building opening, and no standard cut-out size is given. Your installer sets the opening and the clearances from the manual, and checks that the floor or plinth can carry the weight.

Does it need outside air?

There's no outside-air connection listed for the 2120. Ask your installer whether your room needs extra ventilation for this fireplace.

Can the door open the other way?

Yes. The door opening direction can be changed. Tell us which way you want it to open when you order, and we will confirm it with you.

What does the guarantee cover?

Ask us for the guarantee terms for this model before you order. We will confirm them with the supplier.

Can you help with my setup?

Yes. Send a photo and measurements for a product and flue configuration quote. We do not install, so arrange installation with an independent installer.

Reviews

Related products

Get a Quote

Your fireplace, your room

Leave your details for a configuration quote, or chat with us on WhatsApp. Your fireplace, selected extras and delivery are included.

or

Chat on WhatsApp

Your selected setup is added to the message. You choose when to send it.

Built-in Availabilty

We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available

Get a Quote

Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.

NeedInstallation?

PLEASE NOTE: Ony available in Gauteng* We offer a free site visit and quote for installations in Johannesburg. For Pretoria, site visits are R350. Simply give us your details below and we will contact you for further details.

FIND YOUR NEXT FAVOURITE

A few favourites to get you started

Your cart

Your next fire starts here

Your cart is empty.

Find your next favourite.

Shop the range

Quick view