THE WALL
Built into one wall.
It is made for a single-sided built-in installation into a wall. The 1,090 mm façade frames the fire on the wall face, and the 910 mm body goes into the wall behind it.

A wide built-in gas firebox with a coal grate, and no flue to connect.
Original price was: R22,020.00.R20,399.00Current price is: R20,399.00.
Save R1,621In stock Delivery ETA: 5–7 working days
See it in your space. Send a photo and measurements for a quote and a visual preview.
WhatsApp UsGAS FIRE, BUILT IN
The 1090 is a wide firebox built into a single wall, with a black mild-steel façade and an open front. Gas flames rise over a coal-finish grate, and as a vent-free fire it has no flue connection, so there is no chimney to build and no logs to carry in. Just a warm glow at the end of a long day.
THE CITY OUTSIDE, THE FIRE IN
The city lights come on outside, the lamp goes low and the fire does the rest. Set flush in a plastered wall, the 1090 turns the lounge into the warmest spot in the flat, with flames over the coals and no logs to fetch. Pour something nice and stay a while.
The wall, coffee table, rug, shelves, plants and décor are not included. Plan the wall opening, gas supply and ventilation with a registered gas installer.
BEFORE YOU OPEN THE WALL
THE WALL
It is made for a single-sided built-in installation into a wall. The 1,090 mm façade frames the fire on the wall face, and the 910 mm body goes into the wall behind it.
THE ROOM
A vent-free gas fire needs no flue, but room size and ventilation rules still apply. Ask us for the requirements for this firebox and grate before you order, and have a registered gas installer check your room.
THE GAS
The grate supplied is the LPG version of the model 800 coal grate, and it uses up to 0.64 kg of gas an hour. Home Fires also makes natural-gas versions: tell us before you order if you need one.
MEASURE THE WHOLE SETUP
Measure the body, not just the façade.
The façade is 1,090 × 935 mm, but the body that goes into the wall is 910 mm wide, 835 mm high and 450 mm deep. These are product sizes, not a building opening: your installer measures the actual unit before building.
GOOD TO KNOW
Plan the wall opening, gas supply and ventilation with a registered gas installer before you build.
The HomeFires Built-in 1090 firebox, with its black mild-steel housing and façade, and a coal-finish gas grate (model 800). The wall opening, the gas supply pipework and the installation are not included.
The coal grate supplied with this firebox is the LPG version. Home Fires also makes natural-gas versions, and the gas type installed must match the burner you order, so tell us before you order if you need natural gas.
No. It is an open, vent-free firebox with no flue connection, so there is no chimney to build. Vent-free does not remove the room size and ventilation rules: check those with us and your gas installer before you choose the room.
Ask us before you order. We confirm the room size and ventilation needs for this firebox and grate with Home Fires, and your registered gas installer then checks your room.
We do not list a heat output for this firebox and grate, so the Output Calculator has no figure for it. Ask us, and we will check it with Home Fires.
Up to 0.64 kg of gas an hour with the model 800 coal grate.
It is made for a single-sided built-in installation into a wall. The black façade stands 90 mm past the body at each side and 40 mm below it, so it frames the opening on the wall face. Have your registered gas installer plan the opening, the gas supply and the clearances.
The façade is 1,090 mm wide and 935 mm high. The body behind it is 910 mm wide, 835 mm high and 450 mm deep. Its top is flat for the first 100 mm and then slopes down to a rear upright 575 mm high. These are product sizes, not a building opening, so have your installer measure the actual unit.
The coal-finish grate is 750 mm wide, 270 mm deep and 200 mm high.
Ask us for the guarantee terms for this firebox and grate before you order.
Yes. Send a photo and your room and wall measurements, and we will help with the product and configuration. We do not install, so arrange installation with an independent, registered gas installer.
We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available
Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.
PLEASE NOTE: Ony available in Gauteng* We offer a free site visit and quote for installations in Johannesburg. For Pretoria, site visits are R350. Simply give us your details below and we will contact you for further details.
Added to your cart