FLAMM E01 – rotatable Pedestal Closed Combustion Freestanding Fireplace

A rounded stove on a pedestal that turns, so the fire can face where you sit.

Original price was: R37,130.00.Current price is: R34,999.00.

Save R2,131

SKU FLAMME01F/SPED

In stock Delivery ETA: 5–7 working days

About your fireplace

Heat
9 kW nominal · 11 kW maximum
Included
The fireplace on its rotatable pedestal, with the ash pan
Not included
Flue pipes, accessories and installation
Guarantee
Five years on the stove body (limited)

Free delivery in Central Gauteng on orders from R5,500. Other areas: delivery cost on request.

How delivery works

DeliveryHow it works

Because most of our products are huge, it’s difficult for us to keep stock of all of them. For this reason, we deliver a lot of our products directly from our suppliers and manufacturers, to offer you a great price and a fresh braai and a warm fireplace.

PRIORITY DELIVERYWe will make sure you are kept in the loop at every single step of the way and we will have your order processed as a priority. Tracking number included.

FREE DELIVERYLook, it’s free but we are unable to provide an exact time or take specific delivery requests as we are at the mercy of our suppliers. We still do our best to deliver as quickly as possible and in most cases we are much quicker than the stated turn around time.

Mail us for any queries.
[email protected]

Your total R34,999.00

Delivery cost to be confirmed.

Get a Quote

See it in your space. Send a photo and measurements for a quote and a visual preview.

WhatsApp Us

THE E01, UP CLOSE

A tall view of the fire, in heavy steel.

The FLAMM E01 Closed Combustion Fireplace shows its fire through glass 474 mm high, in a fully welded 5 mm steel firebox. Vermiculite lines it, and metallic black high-heat paint finishes the rounded body. The pedestal turns, so the fire can face the couch tonight and the table tomorrow. Feed it hardwood, and empty the ash pan once the fire is out and cold.

  1. Rotatable pedestal baseTurn the fire towards the room
  2. Tall glass280 × 474 mm
  3. Fully welded 5 mm steel fireboxVermiculite lining
  4. Ash panIncluded
  5. Top flue outletFor a 150 mm nominal flue
  6. Installation manualUnder Plan your setup
FLAMM E01 alight on a round hearth plate in a glass-walled lounge at dusk, with a couple sharing red wine on the couch and city lights outside

AN EVENING IN

Turn the FLAMM E01 Closed Combustion Fireplace to the couch.

City lights outside, a glass of red and a cheese board on the table. Turn the E01 on its pedestal so the flames face the couch, settle in under a blanket and let the evening slow right down.

The flue pipe, hearth plate, log rack, firewood, furniture and décor are not included. Have an independent installer confirm the hearth, flue route and clearances.

BEFORE THE FIRST FIRE

Heat, turn and flue, sorted.

THE HEAT

9 kW nominal, up to 11 kW.

The E01 gives 9 kW nominal and up to 11 kW maximum heat output, with a published heating volume of 252 m³. The Output Calculator uses 10 kW, the middle of the two, to compare with your room.

THE PEDESTAL

A fire that faces you.

The E01 stands on a rotatable pedestal base, so you can turn the fire towards the couch or the table. Wherever it faces, keep household furnishings 1,000 mm from the fireplace.

THE FLUE

One outlet, on top.

The flue connects at the top. The collar stands 55 mm above the body, with a 155 mm internal outlet for a 150 mm nominal flue. Send us a photo and measurements for a flue quote.

MEASURE THE WHOLE SETUP

Will it fit your space?

Open dimension drawing
FLAMM E01 Closed Combustion Fireplace dimension drawing: front, side and top views and clearances, in millimetres.
Download the dimension drawing
Body width
522 mm
Body height, above the pedestal
754 mm
Pedestal height, floor to body
314 mm
Pedestal stem depth
200 mm
Outlet collar above the body
55 mm
Outlet internal diameter
155 mm
Flue size (nominal)
150 mm
Glass width × height
280 × 474 mm
Clearance to combustible walls
800 mm
Fuel · finish
Hardwood · metallic black

Confirm the height and depth before a tight fit.

The body is 522 mm wide and 754 mm high, on a 314 mm pedestal. Ask us to confirm the overall height and depth before you plan a tight fit, and have an independent installer check the clearances on site.

The drawing as text
  • ALL SIZES IN MILLIMETRES
  • FLAMM E01 on Rotatable Pedestal
  • Freestanding wood fireplace: closed combustion, on a pedestal that turns
  • 01 FRONT VIEW
  • 522 body width
  • 754 body height
  • 314 pedestal
  • 280 glass
  • 474 glass
  • 02 SIDE VIEW
  • 55 outlet collar
  • 200 stem
  • Front at the left. Back at the right.
  • 03 TOP VIEW
  • Ø155 inside the outlet
  • 522 body width
  • Back at the top. Front at the bottom.
  • For a nominal 150 flue pipe.
  • 04 COMBUSTIBLE WALLS, TOP VIEW (SMALLER SCALE)
  • 800 to wall
  • 800 to wall
  • 05 FLOOR PROTECTOR, TOP VIEW (SMALLER SCALE)
  • 200 at the rear
  • 400 in front
  • 200 at the side
  • Front at the bottom.
  • 06 CEILING AND FURNISHINGS (SMALLER SCALE)
  • 1,200 to the ceiling
  • 1,000 to furnishings
  • PLANNING NOTES
  • These are product sizes. Have an independent installer check the hearth, the flue route and the clearances on site.
  • Ask us to confirm the overall height, the depth and the weight before you plan a tight fit.
  • The fireplace stands on a rotatable pedestal. Plan its position and the flue with your independent installer.
  • Keep household furnishings 1,000 away in every direction the fire faces.
  • In a suitable recess, leave a free air gap of 200 at the sides and top and 50 at the rear.
  • That gap is for airflow only and does not replace the 800 to combustible walls.
  • Chimney flue pipes, accessories and installation are not included. Send us a photo and measurements for a flue quote.

GOOD TO KNOW

Plan your setup.

Read your instruction manual before you plan the installation.

Read the instruction manual

What is included?

The FLAMM E01 closed combustion fireplace in metallic black, on its rotatable pedestal, with the ash pan. Chimney flue pipes, accessories and installation are not included: we quote the flue parts for your setup.

Which fuel does it burn?

Wood. It's designed for hardwood, so plan your woodpile around it.

How much heat does it give?

9 kW nominal and up to 11 kW maximum heat output, with a published heating volume of 252 m³. The Output Calculator uses 10 kW, the middle of the two. Insulation, ceiling height and climate change how warm a room feels.

Does it turn?

Yes. The E01 stands on a rotatable pedestal base, so you can turn the fire to face the part of the room you are using. Plan its position, the flue and the clearances with your independent installer, and keep household furnishings 1,000 mm away in every direction it faces.

Where does the flue connect?

At the top. The outlet collar stands 55 mm above the body, with an internal diameter of 155 mm, and takes a 150 mm nominal flue. Have an independent installer plan the flue route, height and support for your building.

Is the flue included?

No. Chimney flue pipes and accessories are sold separately, because they depend on your room and roof. Send a photo and measurements for a product and flue configuration quote, and we will help you choose the right parts.

How much space does it need?

The body is 522 mm wide and 754 mm high, on a pedestal 314 mm high with a 200 mm stem. Ask us to confirm the overall height, the depth and the weight before you plan a tight fit. Keep at least 800 mm to combustible walls, 1,200 mm to a combustible ceiling and 1,000 mm to household furnishings. Your installer applies the full manual and local requirements.

What does it need underneath?

Use a floor protector under the fireplace that reaches 400 mm in front of it and 200 mm beyond the sides and the rear. Have your installer check that the floor can carry the fireplace.

Can it stand in a recess?

In a suitable recess, leave a free air gap of 200 mm at the sides and top and 50 mm at the rear. That gap is for airflow only and does not replace the 800 mm clearance to combustible walls. Plan it with your independent installer.

How is it made?

The firebox is fully welded from 5 mm steel and lined with vermiculite. The finish is a metallic black high-heat paint.

What does the guarantee cover?

The main stove body has an extended five-year limited Home Fires warranty, for new units bought from Home Fires or an authorised retailer. Register it within 30 days, or the term drops to 12 months. It covers the first owner at the first installation, with proof of purchase and professional installation records. Wear parts, glass, linings, seals and finishes are excluded. Ask us for the full terms.

Can you help with my setup?

Yes. Send a photo and your room measurements for a product and flue configuration quote. We do not install, so arrange installation with an independent installer.

Reviews

Get a Quote

Your fireplace, your room

Leave your details for a configuration quote, or chat with us on WhatsApp. Your fireplace, selected extras and delivery are included.

or

Chat on WhatsApp

Your selected setup is added to the message. You choose when to send it.

Built-in Availabilty

We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available

Get a Quote

Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.

FIND YOUR NEXT FAVOURITE

A few favourites to get you started

Your cart

Your next fire starts here

Your cart is empty.

Find your next favourite.

Shop the range

Quick view