Jetmaster Pro Universal 500 with Basket Grate and Pan

A neat built-in open fire, with its basket grate and pan included.

Original price was: R10,656.00.Current price is: R10,099.00.

Save R557
Rated 4.7 out of 5Google rating ·54 reviews

Pay in interest-free instalments with Float

SKU 40211409

In stock Delivery ETA: 5–15 working days

Complete your setup

See it in your space. Send a photo and measurements for a quote and a visual preview.

WhatsApp Us

A PROPER FIRE, MADE TO FIT IN

The Jetmaster Pro Universal 500.
Grate and pan ready, just add logs.

The Jetmaster Pro Universal 500 is a single-sided fireplace for your wall, and its basket grate and pan are part of the package. Bring wood or charcoal, light up and use the damper control as the fire settles. The heavy-duty mild-steel body gives you convection and radiated heat, so everyone has a reason to stay in the room tonight.

The 500 is made on special request, so ask us before you plan around it.

  1. Heavy-duty mild-steel bodyWith a damper control
  2. Heat two waysConvection and radiated
  3. Fibreglass on all built-in surfacesFirebox and smoke gather
  4. An air inlet that stays clearLower front: open and unobstructed
  5. A non-combustible hearthPlan it with your builder
  6. Installation manualUnder Plan your setup
Jetmaster Pro Universal 500 burning logs in a red brick chimney breast, as a grandfather and grandson play chess in leather armchairs on an evening at home

ONE MORE GAME BEFORE BED

Your move, Grandpa.

Chess by the fire, the logs crackling and nobody in any hurry. A grandfather, a grandson and a board that could go either way. That's what a fireplace does best: it gives people a reason to stay in the room, and a warm spot to lose gracefully.

The brick chimney breast, hearth, armchairs, table, chess set, rug, lamp and logs are not included. Plan the flue, hearth and clearances with an independent installer.

A LITTLE THINKING NOW, MANY WARM NIGHTS

Sort the details.
Keep the fire.

THE GRATE

Logs tonight, charcoal tomorrow.

Wood or charcoal both work here. The basket grate holds your fire and the pan sits below it, so all you need to bring is the fuel and someone to share the evening with.

THE ROOM

Heat you can plan around.

You get convection and radiated heat, with a listed heating area of 52 m² as a guide to your room's floor area. The damper control sits on the body, close at hand when you need it.

THE ROUTE UP

Flue parts, your way.

The flue adapter, round flue pipe, rotating cowl and insulation blanket are options on this page. Quantities depend on your design, so send us a photo and measurements and we'll quote the configuration.

MEASURE THE WHOLE SETUP

Will it fit your space?

Open the full drawing
Jetmaster Pro Universal 500 dimension drawing, page 1 of 3: front and side views, in millimetres.
Page 1 of 3
Body width × depth
549 × 355 mm
Body height, without the gather
630 mm
Gather above the body
252 mm
Add to the width for the frame
100 mm
Wood grate width × depth
470 × 280 mm
Rectangular flue width × depth
200 × 200 mm
Round flue diameter (option)
225 mm
Insulation, existing masonry recess
25 mm
Fuel
Wood or charcoal
Material
Mild steel

Count the gather and frame as well as the body.

The body is 630 mm high before the 252 mm gather and the flue, and the frame adds 100 mm to the width. These are product sizes, not a building opening, so ask us for the opening size and have your installer check the actual unit and safe clearances.

Planning notes

  • Comes with a basket grate and pan. The 500 is made on special request: ask us before you plan around it.
  • For the width including the frame, add 100 mm.
  • These are product sizes, not a building-opening size. Ask us for the opening size before you build.
  • Ask us for the frame height and projection and the flue position: we confirm them with Jetmaster.
  • Build the chimney at least 3,600 high from the hearth. Ask us how far it must clear your roof apex.
  • The frame can sit at most 150 behind the face of the brickwork or plaster.
  • In an existing masonry recess, allow 25 mm all round for insulation.
  • An existing chimney needs a flue area of at least 300 cm².
  • Insulate all built-in surfaces of the firebox and gather with fibreglass. Keep the lower front air inlet open.
  • Ask us which flue parts come with it: the gather, adaptor, flue lengths and cowl.
  • The gas grate belongs to the gas version. It is not part of this wood fireplace.

Download printable drawing (A4 PDF)

The drawing as text
  • ALL SIZES IN MILLIMETRES
  • Jetmaster Pro Universal 500 with Basket Grate and Pan
  • Built-in open fireplace for wood or charcoal
  • 01 FRONT VIEW
  • Damper
  • Basket grate and pan
  • 200 rectangular flue
  • 252 gather
  • 630 body height
  • 470 wood grate
  • 549 body width
  • 02 SIDE VIEW
  • 200 rectangular flue
  • 355 body depth
  • Front at the right.
  • 03 TOP VIEW
  • 549 body width
  • 355 body depth
  • Front at the bottom. White: the flue outlet.
  • 04 FLUE ACCESSORIES
  • 200 width
  • 200 depth
  • 225 diameter
  • Rectangular flue
  • Round flue
  • 1,200 length
  • One length of round flue
  • 05 WOOD GRATE (INCLUDED)
  • 470 width
  • 280 depth
  • 06 GAS GRATE (OPTION)
  • 450 width
  • 220 depth
  • 07 CLEARANCES FROM THE FRONT (SMALLER SCALE)
  • 200 side
  • 200 side
  • 450 above
  • 200 hearth
  • 200 hearth
  • Keep combustible material outside the dashed line,
  • unless it is properly insulated.
  • 08 HEARTH FROM ABOVE (SMALLER SCALE)
  • 400 in front
  • 200 side
  • 200 side
  • Front at the bottom. White: the non-combustible hearth.
  • PLANNING NOTES
  • Comes with a basket grate and pan. The 500 is made on special request: ask us before you plan around it.
  • For the width including the frame, add 100 mm.
  • These are product sizes, not a building-opening size. Ask us for the opening size before you build.
  • Ask us for the frame height and projection and the flue position: we confirm them with Jetmaster.
  • Build the chimney at least 3,600 high from the hearth. Ask us how far it must clear your roof apex.
  • The frame can sit at most 150 behind the face of the brickwork or plaster.
  • In an existing masonry recess, allow 25 mm all round for insulation.
  • An existing chimney needs a flue area of at least 300 cm².
  • Insulate all built-in surfaces of the firebox and gather with fibreglass. Keep the lower front air inlet open.
  • Ask us which flue parts come with it: the gather, adaptor, flue lengths and cowl.
  • The gas grate belongs to the gas version. It is not part of this wood fireplace.

GOOD TO KNOW

Plan your setup.

Read your installation manual first, then plan the wall, the hearth and the flue.

Read the instruction manual

What comes with it?

The mild-steel fireplace body with its damper control, plus the basket grate and pan. The flue adapter, flue pipe, rotating cowl and insulation blanket are options you can add on this page. Ask us to confirm which flue parts come with your fireplace, including the gather, before you plan.

Is the 500 a standard size?

The 500 is made on special request, so ask us before you plan around it. We'll check the details with Jetmaster for you.

What can I burn in it?

Wood or charcoal, on the basket grate and pan. The wood grate is 470 mm wide and 280 mm deep: the size of the fire grate, not a cooking area. The range also has log-pan and gas-grate configurations, as alternatives. The gas grate, 450 mm wide and 220 mm deep, belongs to the gas version and is not supplied here.

How warm will it keep my room?

It gives convection and radiated heat, and its listed heating area is 52 m². That figure is a range guide to room floor area, not a rating. There's no published kW output for this model, so we don't quote one. Tell us about your room and we'll talk it through with you.

Do the flue pipes and cowl come with it?

They're sold separately, along with the adapter. The rectangular flue section is 200 × 200 mm, and the adapter takes it to a 225 mm round flue. One listed length of round flue pipe is 1,200 mm. Quantities depend on your set-up and design, so send a photo and measurements for a flue configuration quote.

How high does the chimney need to be?

At least 3,600 mm from the hearth, and roof-apex requirements apply as well, so ask us before you build. Surrounding brickwork of 110 mm is adequate only where moulded flue liners are used. If you're using an existing chimney, it needs a free flue area of at least 300 cm² throughout its length.

How much room does it take up?

The body is 549 mm wide, 355 mm deep and 630 mm high, with the gather adding 252 mm above it. For the width including the frame, add 100 mm. The frame recess from the finished masonry or plaster face is 150 mm at most. These are product sizes, not a building opening. Ask us for the opening size, the frame height and the frame projection before you build.

What about clearances and the hearth?

Combustible materials should not be fitted within 200 mm of the sides of the firebox or 450 mm above it, unless adequate provision is made to insulate them. Your non-combustible hearth must be at least 200 mm wider than the firebox on each side and at least 400 mm to the front, with the air inlet unobstructed. Plan it with your builder.

How do I get it installed safely?

Arrange installation with an independent installer. Your installer must follow the installation manual that comes with the unit. All built-in surfaces of the firebox and smoke gather must be insulated with fibreglass, and the lower front air inlet must stay open and unobstructed.

Will it go into my existing masonry fireplace?

It can. Allow 25 mm all round for the insulation. Where the space between the fireplace and the recess is below 75 mm, use extra insulation. Where it's above 75 mm, fill it with brick. A surround infill strip overlaps the frame edge by 10 mm, in front of or behind the frame. Your installer checks the recess and the chimney first.

What guarantee does it have?

The fireplace box has a five-year Jetmaster warranty against defects in materials and workmanship from the invoice date, with normal domestic use, correct installation, maintenance and proof of purchase. Corrosion, discolouration, listed items in the flame path, modifications without written authorisation and non-approved accessories on the firebox are excluded. The basket grate and pan have a twelve-month warranty against defects, excluding misuse, fair wear and tear, rust and discolouration. Ask us for the full terms.

Can you help with my setup?

Yes. Send a photo and measurements for a product and flue configuration quote. Arrange installation with an independent installer.

Reviews

Get a Quote

Your fireplace, your room

Leave your details for a configuration quote, or chat with us on WhatsApp. Your fireplace, selected extras and delivery are included.

or

Chat on WhatsApp

Your selected setup is added to the message. You choose when to send it.

Built-in Availabilty

We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available

Get a Quote

Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.

FIND YOUR NEXT FAVOURITE

A few favourites to get you started

Your cart

Your next fire starts here

Your cart is empty.

Find your next favourite.

Shop the range

Quick view