THE HEIGHT
Low and easy, or up on the stand.
The R0803 stands on its own feet, ready for your hearth. Want the fire closer to eye level from the couch? The optional stand adds 250 mm, and you can add it on this page.

Thick steel, a cast iron door and a fire you can feed with wood or anthracite.
From: Original price was: R16,790.00.R15,999.00Current price is: R15,999.00.
Save R791Pay in interest-free instalments with Float
In stock Delivery ETA: 5–7 working days
See it in your space. Send a photo and measurements for a quote and a visual preview.
WhatsApp UsMORE ABOUT THE R0803
The HomeFires R0803 Freestanding Fireplace keeps things simple. Wood or anthracite goes in, the cast iron door closes and closed combustion gets to work. A thick steel body and a fire brick lining do the heavy lifting, the riddling grate and ash drawer handle the clean-up, and the optional stand is there if you want the stove higher.
The stand is optional and sold separately. Add it on this page if you want it.
SUNLIGHT OUTSIDE, FIRE INSIDE
The sky is blue, the air has a bite and the wood basket is full. Light the stove after breakfast and let the day take its time: a second cup of coffee, the paper at the table and the kind of slow winter morning that turns into a slow winter afternoon.
The flue pipe, stone hearth, wood basket, table, rug and flowers are not included. Plan the flue, hearth and clearances with an independent installer.
BEFORE THE FIRST FIRE
THE HEIGHT
The R0803 stands on its own feet, ready for your hearth. Want the fire closer to eye level from the couch? The optional stand adds 250 mm, and you can add it on this page.
THE FLUE
With flue outlets at the top and the rear, your installer can choose the route that suits your room. Flue pipes are separate, so send us a photo and your measurements and we will quote the parts.
THE HEAT
The listed heating volume is 196 m³. Multiply your room's length, width and height, and compare the two. Unsure? Send us the numbers and we will chat it through with you.
MEASURE THE WHOLE SETUP
Leave the stove room to breathe.
The heights run up to the top plate, and the flue collar stands above it. These are product sizes, not a building opening. Your installer must confirm the distances from combustible material for your stove. Ask us for the stand depth.
Download printable drawing (A4 PDF)
GOOD TO KNOW
Read the R0803 manual before you plan the installation.
See also: All fireplaces · More from Home Fires · HomeFires R1201 Freestanding Fireplace
The R0803 stove in its standard black finish, with a riddling grate and an ash drawer. The optional stand, flue pipes, cowl and hearth are not part of the stove.
No. The stove stands on its own feet at 530 mm high. The stand is optional and sold separately, and you can add it on this page. It is 250 mm high and brings the top plate to 780 mm. Ask us for the stand depth.
Wood and anthracite are the fuels listed as suitable for the R0803.
The listed heating volume is 196 m³. Compare it with your room's length × width × height. For the heat output in kW, ask us and we will confirm the figure for your stove.
No. Flue pipes and the cowl are separate. Send a photo and measurements for a product and flue configuration quote, and we will confirm the parts for your setup.
Fit 6 mm rope with 125 mm pipes, or a 130–150 mm appliance adaptor with 150 mm pipes. Ask us for the flue outlet size before you order pipes, and we will confirm the right parts.
The R0803 has flue outlets at the top and the rear. The centre of the top outlet sits 115 mm from the rear edge of the top plate. The low round 100 mm connection at the rear is an air inlet, not the rear flue outlet.
The top plate is 490 mm wide. The stove is 360 mm deep and 530 mm high, or 780 mm with the optional stand. The side control takes the width to 503 mm and the door handle takes the depth to 383.2 mm. The flue collar stands above the top plate.
Keep at least 1,200 mm in front, 750 mm at the rear and 500 mm at each side from combustible material. Your installer must confirm these distances for your stove.
For a constructional hearth in an existing fireplace, the hearth reaches 300 mm in front of the stove and 150 mm past each side. These are hearth sizes, not a cut-out size. Your installer plans the hearth for your room.
The stove's main body has a three-year extended limited Home Fires warranty when you register within 30 days and follow the conditions in the manual. Without that registration, it is 12 months.
Yes. Send a photo and measurements for a product and flue configuration quote. Arrange installation with an independent installer.
We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available
Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.
Added to your cart