HomeFires R1201 Freestanding Fireplace with optional Stand

A closed combustion stove with a cast iron door, for wood or anthracite.

From: Original price was: R24,100.00.Current price is: R22,799.00.

Save R1,301
Rated 4.7 out of 5Google rating ·54 reviews

Pay in interest-free instalments with Float

SKU HFF/SR1201

In stock Delivery ETA: 5–7 working days

Complete your setup

Need help choosing?

Plan your setup

See it in your space. Send a photo and measurements for a quote and a visual preview.

WhatsApp Us

WHAT MAKES IT TICK

HomeFires R1201 Freestanding Fireplace.
Steel and fire.

The HomeFires R1201 Freestanding Fireplace is a closed combustion stove with a precision-welded, thick steel body and a cast iron door. Fire brick lines the inside, wood or anthracite does the rest, and the riddling grate and ash drawer look after the morning after. Keep it on its own feet, or add the optional stand for extra height.

The stand is optional and sold separately. Add it on this page if you want the stove higher.

  1. Precision-welded thick steel bodyStandard black finish
  2. Cast iron door
  3. Thermo-refractory fire brick lining
  4. Riddling grate and ash drawerBoth come with the stove
  5. Top and rear flue outletsAsk us for the outlet size
  6. Installation manualUnder Plan your setup
HomeFires R1201 Freestanding Fireplace in black on a slate hearth in a cosy lounge at dusk, logs burning, with a leather armchair and a wooden side table

THE BEST SEAT IN THE HOUSE

Pull up a chair.
The evening is sorted.

The sun is going down, the logs have caught and there is a blanket with your name on it. Kick off your shoes, bring a good book and settle in. Some winter evenings ask for nothing more than this stove, one comfortable chair and nowhere else to be.

The flue pipe, slate hearth, armchair, blanket, table and flowers are not included. Plan the flue, hearth and clearances with an independent installer.

A LITTLE PRACTICAL THINKING

Choose the height, then plan the flue.

THE HEIGHT

On its feet or on the stand.

Keep the stove on its own feet, or lift it 250 mm with the optional stand. The stand is sold separately, so you add it on this page only if your room calls for it.

THE FUEL

Wood or anthracite.

Burn wood or anthracite, whichever suits your winter. The riddling grate and ash drawer come with the stove, so the clean-up is part of the plan from the first fire.

THE HEAT

Think in room volume.

The listed heating volume is 280 m³. Multiply your room's length, width and height, then compare the two. Ask us if your space is open-plan and you would like a second opinion.

MEASURE THE WHOLE SETUP

Will it fit your space?

Open the full drawing
HomeFires R1201 Freestanding Fireplace dimension drawing, page 1 of 3: front and side views and stand, in millimetres.
Page 1 of 3
Top plate width × stove depth
570 × 362 mm
Stove height, on its own feet
575 mm
Height with the optional stand
825 mm
Optional stand height
250 mm
Body and stand width
550 mm
Width with side controls
605.64 mm
Depth with door handle
382.7 mm
Firebox width × depth
500 × 200 mm
Firebox height
350 mm
Material
Steel body, cast iron door

Plan the stove, stand and flue together.

The heights run up to the top plate, and the flue collar stands above it. These are product sizes, not a building opening. Ask us for the stand depth, and have your installer confirm the distances for your stove.

Planning notes

  • These are product sizes. The heights run up to the top plate: the flue collar stands above it.
  • The stand is optional and is sold separately. Ask us for the stand depth.
  • Flue outlets: top and rear. Fit 6 mm rope with 125 mm pipes, or a 130–150 mm appliance adaptor with 150 mm pipes.
  • Ask us for the flue outlet size before you order pipes. The rear air inlet is not the rear flue outlet.
  • Keep the distances shown from combustible material. Your installer must confirm them for your stove.
  • Ask us for the distance to keep clear in front of the stove.
  • The hearth sizes are for a constructional hearth in an existing fireplace. They are not a cut-out size.
  • The listed heating volume is 280 m³.

Download printable drawing (A4 PDF)

The drawing as text
  • ALL SIZES IN MILLIMETRES
  • HomeFires R1201 Freestanding Fireplace with optional Stand
  • Closed combustion freestanding stove for wood and anthracite
  • 01 FRONT VIEW, ON THE OPTIONAL STAND
  • Top flue outlet
  • 575 stove
  • 250 stand
  • 825 with stand
  • 550 body and stand
  • 570 top and base plate
  • 02 SIDE VIEW, ON THE OPTIONAL STAND
  • 100 rear air inlet
  • 382.7 with handle
  • Front at the right.
  • 03 TOP VIEW
  • 112 flue centre
  • 362 depth
  • 570 top plate
  • 605.64 with side controls
  • Front at the bottom.
  • 04 CONSTRUCTIONAL HEARTH
  • Stove
  • Hearth
  • 150 side
  • 150 side
  • 300 front
  • 05 DISTANCES (SMALLER SCALE)
  • Stove
  • 700 rear
  • 400 side
  • 400 side
  • Dashed line: combustible material. Front at the bottom.
  • 06 FIREBOX
  • 500 width
  • 350 height
  • 200 depth
  • Side
  • PLANNING NOTES
  • These are product sizes. The heights run up to the top plate: the flue collar stands above it.
  • The stand is optional and is sold separately. Ask us for the stand depth.
  • Flue outlets: top and rear. Fit 6 mm rope with 125 mm pipes, or a 130–150 mm appliance adaptor with 150 mm pipes.
  • Ask us for the flue outlet size before you order pipes. The rear air inlet is not the rear flue outlet.
  • Keep the distances shown from combustible material. Your installer must confirm them for your stove.
  • Ask us for the distance to keep clear in front of the stove.
  • The hearth sizes are for a constructional hearth in an existing fireplace. They are not a cut-out size.
  • The listed heating volume is 280 m³.

GOOD TO KNOW

Plan your setup.

Read the R1201 manual before you plan the installation.

Read the instruction manual

What is included?

The R1201 stove in its standard black finish, with a riddling grate and an ash drawer. The optional stand, flue pipes, cowl and hearth are not part of the stove.

Is the stand included?

No. The stand is optional and sold separately, and you can add it on this page. It is 250 mm high and brings the stove to 825 mm at the top plate. Ask us for the stand depth.

Which fuel can I use?

Wood and anthracite are the fuels listed as suitable for the R1201.

How much space will it heat?

The listed heating volume for the R1201 is 280 m³. Multiply your room's length, width and height to compare. For the heat output in kW, ask us and we will confirm the figure for your stove.

Is the flue included?

No. Flue pipes and the cowl are separate. Send a photo and measurements for a product and flue configuration quote, and we will confirm the parts for your setup.

Where does the flue connect?

The R1201 has top and rear flue outlets. The centre of the top outlet sits 112 mm from the rear edge of the top plate. The low round 100 mm connection at the rear is an air inlet, not the rear flue outlet.

Which flue pipes does it take?

Fit 6 mm rope with 125 mm pipes, or a 130–150 mm appliance adaptor with 150 mm pipes. Ask us for the flue outlet size before you order pipes, and we will confirm the right parts.

How much space do I need?

The top plate is 570 mm wide. The stove is 362 mm deep and 575 mm high, or 825 mm with the optional stand. The side controls take the width to 605.64 mm and the door handle takes the depth to 382.7 mm. The flue collar stands above the top plate.

How far from combustible material?

Keep at least 700 mm at the rear and 400 mm at each side from combustible material. Your installer must confirm these distances for your stove. Ask us for the distance to keep clear in front of it.

How big should the hearth be?

For a constructional hearth in an existing fireplace, the hearth reaches 300 mm in front of the stove and 150 mm past each side. These are hearth sizes, not a cut-out size. Your installer plans the hearth for your room.

What does the guarantee cover?

The stove's main body has a three-year extended limited Home Fires warranty when you register within 30 days and follow the conditions in the manual. Without that registration, it is 12 months.

Can you help with my setup?

Yes. Send a photo and measurements for a product and flue configuration quote. Arrange installation with an independent installer.

Reviews

Get a Quote

Your fireplace, your room

Leave your details for a configuration quote, or chat with us on WhatsApp. Your fireplace, selected extras and delivery are included.

or

Chat on WhatsApp

Your selected setup is added to the message. You choose when to send it.

Built-in Availabilty

We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available

Get a Quote

Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.

FIND YOUR NEXT FAVOURITE

A few favourites to get you started

Your cart

Your next fire starts here

Your cart is empty.

Find your next favourite.

Shop the range

Quick view