THE HEAT
9 kW nominal, up to 11 kW.
The CUTE 1200 gives 9 kW nominal and up to 11 kW maximum heat output, with a published heating volume of 252 m³. The Output Calculator uses 10 kW, the middle of the two, to compare with your room.
Sale!
FLAMM CUTE 1200 – Closed Combustion Freestanding Fireplace
A compact firebox on a long, low log stand, and it turns to face the room.
Original price was: R37,440.00.R34,999.00Current price is: R34,999.00.
Save R2,441In stock Delivery ETA: 5–7 working days
About your fireplace
- Heat
- 9 kW nominal · 11 kW maximum
- Included
- The fireplace on its rotating log stand
- Not included
- Flue pipes, accessories and installation. It has no ash pan.
- Guarantee
- Five years on the stove body (limited)
14-day returns on the unit*
Secure payments
See it in your space. Send a photo and measurements for a quote and a visual preview.
WhatsApp UsTHE CUTE 1200, UP CLOSE
A compact fire on a long, low stand.
The CUTE 1200 keeps the firebox compact and sets it on a log stand 1,200 mm wide, with room for the next logs right beside the fire. The fully welded 5 mm steel firebox has a firebrick lining and a metallic black high-heat paint finish, and it turns on the stand to face the room. Feed it hardwood and enjoy the view.
- Rotatable firebox on the log standTurn the fire towards the room
- Fully welded 5 mm steel fireboxFirebrick lining
- Metallic black high-heat paint
- Burns hardwoodThe fuel it's designed for
- Top flue outletFor a 200 mm nominal flue
- Installation manualUnder Plan your setup
SLOW SUNDAYS
An afternoon that asks for nothing.
Sun through the window, a knitted throw on the leather couch and logs stacked in the corner. The CUTE 1200 sits low against the old brick, its fire bright behind the glass, and the afternoon asks nothing more of you than another cup of coffee.
The flue pipe, hearth plate, log holder, firewood, furniture and décor are not included. Have an independent installer confirm the hearth, flue route and clearances.
KNOW YOUR FIRE
Heat, turn and flue, sorted.
THE STAND
Turn the fire your way.
The firebox turns on its log stand, so you can angle the fire towards the couch or the table. The long stand also keeps your next logs close at hand.
THE FLUE
One outlet, on top.
The flue connects at the top, with a 200 mm nominal flue. The outlet centre sits 241 mm from the rear projection, which helps your installer plan the route. Send a photo and measurements for a flue quote.
MEASURE THE WHOLE SETUP
Will it fit your space?
- Overall width (log stand)
- 1,200 mm
- Overall height, to the collar top
- 839 mm
- Firebox width × height
- 600 × 400 mm
- Log stand height
- 325 mm
- Casing depth
- 425 mm
- Depth to rear projection, no handle
- 454 mm
- Flue centre from the rear projection
- 241 mm
- Outlet collar above the body
- 71 mm
- Flue size (nominal)
- 200 mm
- Fuel · finish
- Hardwood · metallic black
Plan the stand, floor protector and flue together.
It stands 839 mm high to the top of the outlet collar, on a log stand 1,200 mm wide. The casing is 425 mm deep, or 454 mm to the rear projection, with the handle beyond that. Keep 800 mm to combustible walls.
The drawing as text
- FLAMM CUTE 1200 on rotating log stand. Dimensions in mm, closed position.
- Front: firebox width 600 mm
- Front: firebox height 400 mm
- Front: log stand height 325 mm
- Front: log stand width 1,200 mm
- Front: overall height 839 mm, floor to the collar top
- Side: outlet sleeve 50 mm
- Side: outlet 71 mm above the body
- Side: casing depth 425 mm
- Top: outlet Ø201.8 mm, inner circle Ø146 mm
- Top: casing depth 425 mm, 454 mm to the rear projection
- Top: flue centre 241 mm from the rear projection
- Product notes: rotatable firebox on log stand. 425 mm casing; 454 mm to rear projection. Nominal flue: 200 mm.
- Installation, plan diagrams (schematic):
- Combustible walls: 800 mm from the fireplace, shown at the side and the rear
- Floor protector: 400 mm in front, 200 mm at the side, 200 mm at the rear
- Ceiling above: 1,200 mm
- Furnishings: 1,000 mm
- Read the complete installation manual. An independent installer must check the site.
GOOD TO KNOW
Plan your setup.
Read your instruction manual before you plan the installation.
What is included?
The FLAMM CUTE 1200 closed combustion fireplace in metallic black, on its rotating log stand. It has no ash pan. Chimney flue pipes, accessories and installation are not included: we quote the flue parts for your setup.
Which fuel does it burn?
Wood. It's designed for hardwood, so plan your woodpile around it. The long log stand keeps the next logs close at hand.
How much heat does it give?
9 kW nominal and up to 11 kW maximum heat output, with a published heating volume of 252 m³. The Output Calculator uses 10 kW, the middle of the two. Insulation, ceiling height and climate change how warm a room feels.
Does the fire turn?
Yes. The firebox is rotatable on its log stand, so you can angle the fire towards the part of the room you are using. Plan its position, the flue and the clearances with your independent installer.
Is there an ash pan?
No. The CUTE 1200 has no ash pan. Let the fire burn out and the ash cool fully before you clear it.
Where does the flue connect?
At the top, with a 200 mm nominal flue. The outlet collar stands 71 mm above the body, its centre is 241 mm from the rear projection, and the outlet measures 201.8 mm across. Have an independent installer plan the flue route, height and support.
Is the flue included?
No. Chimney flue pipes and accessories are sold separately, because they depend on your room and roof. Send a photo and measurements for a product and flue configuration quote, and we will help you choose the right parts.
How much space does it need?
The log stand is 1,200 mm wide and 325 mm high, and the fireplace stands 839 mm to the top of the outlet collar. The firebox is 600 mm wide and 400 mm high. The casing is 425 mm deep, 454 mm to the rear projection, with the handle beyond that. Keep at least 800 mm to combustible walls, 1,200 mm to a combustible ceiling and 1,000 mm to household furnishings. Your installer must follow the installation manual that comes with the unit.
What does it need underneath?
Use a floor protector under the fireplace that reaches 400 mm in front of it and 200 mm beyond the sides and the rear. Have your installer check that the floor can carry the fireplace.
Can it stand in a recess?
In a suitable recess, leave a free air gap of 200 mm at the sides and top and 50 mm at the rear. That gap is for airflow only and does not replace the 800 mm clearance to combustible walls. Plan it with your independent installer.
What does the guarantee cover?
The main stove body has an extended five-year limited Home Fires warranty, for new units bought from Home Fires or an authorised retailer. Register it within 30 days, or the term drops to 12 months. It covers the first owner at the first installation, with proof of purchase and professional installation records. Wear parts, glass, linings, seals and finishes are excluded. Ask us for the full terms.
Can you help with my setup?
Yes. Send a photo and your room measurements for a product and flue configuration quote. We do not install, so arrange installation with an independent installer.
