THE HEAT
Start with your room.
Jetmaster lists a heat output of 17 kW. The Output Calculator on this page uses that figure to compare the fireplace with your room. Use the result as a guide when you plan.

A fire with glass on both sides, ready to share between two living spaces.
Original price was: R55,610.00.R52,599.00Current price is: R52,599.00.
Save R3,011In stock Delivery ETA: 5–7 working days
See it in your space. Send a photo and measurements for a quote and a visual preview.
WhatsApp UsTHE FIRE, FRONT AND BACK
The Firescape 1060 module puts the fire on show from both sides, through glass on its front and back. Vermiculite boards line the firebox, and Jetmaster lists a heat output of 17 kW. This version comes without a log box, so you decide with your installer what it stands on and where it sits in the room.
SLOW AFTERNOONS IN
Coffee on the couch, the paper at the table and the flames glowing in between. The glass on both sides lets the fire belong to the whole room, so the afternoon drifts from lunch to the couch without anyone missing the view.
The plinth, hearth plate, furniture, plants and firewood are not included. The flue pipe is an option, and an independent installer fits the flue.
A LITTLE PRACTICAL THINKING
THE HEAT
Jetmaster lists a heat output of 17 kW. The Output Calculator on this page uses that figure to compare the fireplace with your room. Use the result as a guide when you plan.
THE BASE
This version comes without a log box, so you choose what the fireplace stands on. Plan the base and the safe clearances with an independent installer before the building work starts.
THE FLUE
The fireplace takes a 175 mm round flue (nominal size), and each separate flue section is 1,200 mm long. The flue pipe, cowl and escutcheon plate are options on this page. Send a photo and measurements, and we confirm the flue parts for your setup.
MEASURE THE WHOLE SETUP
Plan the fireplace, its base and the flue together.
The fireplace body is 1,085 mm wide, 581 mm deep and 587 mm high, without the frame, collar and handles, and it takes a 175 mm round flue (nominal size). These are product dimensions, not clearances, so have your installer check the actual unit, the base and safe clearances.
GOOD TO KNOW
Plan the base, the flue and the safe clearances with your installer before the fireplace goes in.
The Firescape 1060 double-sided fireplace module with its vermiculite inner boards. It comes without a log box. The flue pipe, cowl and escutcheon plate are options that you choose on this page, and installation is not included.
Jetmaster lists a heat output of 17 kW, and the Output Calculator on this page uses 17 kW to compare the fireplace with your room. Jetmaster's guide gives a heating range of up to 260 m². Treat that as a guide, not a promise: your room, ceilings and insulation decide the result.
No. This version comes without a log box, so plan the base it stands on with your installer.
A 175 mm round flue (nominal size). Each separate flue section is 1,200 mm long. Have an independent installer plan the height, support, roof exit and any bends. We confirm the flue parts for your setup with your quote.
No. The flue pipe, cowl and escutcheon plate are options that you choose on this page. Send a photo and measurements for a product and flue configuration quote.
The body is 1,085 mm wide, 581 mm deep and 587 mm high. These sizes leave out the frame, the collar and the handles, and they are not clearances. Have your installer check the actual unit, the base and the safe clearances.
Jetmaster guarantees the fireplace box for 5 years from the invoice date against defects in materials and workmanship, with normal domestic use and maintenance. Flue pipes and cowls have 12 months; rust, discolouration and fair wear and tear are not covered. Parts that wear in use, such as the vermiculite boards, rope seals, door handles and glass, are not covered, and the installation must follow Jetmaster's manual. Ask us for the full terms.
Yes. Send a photo and measurements for a product and flue configuration quote. Arrange installation with an independent installer.
We often have stock of this unit. Fill in the form below and we will get back to in within the hour to let you know if it’s available
Would you like a PDF quote for this product? Simply provide us with your name and email and we will send you a quote ASAP.
PLEASE NOTE: Ony available in Gauteng* We offer a free site visit and quote for installations in Johannesburg. For Pretoria, site visits are R350. Simply give us your details below and we will contact you for further details.
Added to your cart